Patol   Linear Heat Detecting Cable - Page 4
Back to ANALOGUE
  This Section:- Tabular Parameters  
SECTION HOME   Specification  
PREVIOUS PAGE System Configuration & Equipment Compatibility  
       
 
Tabular Parameters
 
As an alternative to the characteristic graphs, this table shows expected performance for eight quantum zone monitor  settings. 
The table indicates trip levels as follows:- 
  
  • 1 m trips take into account the effect of the rest of the specified zone cable being at 25°C.
  • Expected trigger for the whole of the zone length.

  • Normally Levels 1-3 are implemented for special applications only;  Level 4 & above being adequate for all zone lengths.
     
    Specification
     
    Overall Diameter :  2.8 - 3.0 mm 
    Colour :  Red 
    Printed Definition :  ' Patol  Linear Fire Detector Type-D  ' 
    Outer Sheath Material :  PVC
     
    Braid :    Tinned Copper Wire 
    Inner Dielectric :  White PVC 
    Central Conductor :  Copper Clad Steel 
    Tensile Strength :  200 Newtons
     
    System Configuration & Equipment Compatibility
     
    The Line Heat Detector is compatible with many existing installations and monitoring equipments. Patol will be pleased to give advice on the Line Heat Detector in respect of it's suitability as a replacement 'spare' for any particular established system. 
    The following diagrams indicate typical system configurations:-
     
     
     

       PATOL LIMITED - Rectory Road, Padworth Common, Berkshire, UK.   Tel: 0118 9701701   Fax: 0118 9700700
       Email:- patol.limited@ntlworld.com    info@patol.co.uk